® Waves System
V 1.0 - 2014
I.D. AL - VideoPlayer VP250HD - Video/Audio player - User manual
- 11 -
The name of the folder have an effect on the output volume. This function is used to broadcast messages
loud more or less than others files.
Exemple :
001 [V05] : Volume is set at 5 from 32 step (00 to 31)
001 [V31] : Volume is set at 31, maximum value
001 [V00] : Volume is set at 00, minimum value (Mute)
- If the variation of values exceeds the minimum or maximum values of the player, the levels are settled
to their maximum or minimum.
- If the volume level is set to its maximum or minimum, the instruction is ignored.
●
[NT]
-
This option defines the interruption mode of the folder currently read.
If this options is registered within the name of the folder, the read file cannot be interrupted and instructions
received are ignored.
Without this option, the reading of the currently read directory can be interrupted any time by an
external action. (input, RS232 ...)
Example:
001 [NT] - The folder can NOT be interrupted.
In that case, an action on one of the input contacts through RS232 or other is ignored and the reading of
the current file is not stopped.
Caution! The action is not memorised and the triggering information is lost.
●
[RLSx]
and
[RLEx] - Active or deactive the outputs contacts (when play folder or at the end)
The output contact is switched on/off by the name of the folder when player start to play the folder [RLS]
or at the end of the folder [RLE].
[RLSx] : x is the state of the output wheb start to play the folder. 0 = off / 1 = on
[RLEx] : x is the state of the output at the end of the folder. 0 = off / 1 = on
With thos 2 options, you can swith on a lamp during the audio file and swith off at the end.
x is the state of the output :
If x = 0, the output is switched off, no contact.
If x = 1, the output is switched on, a contact is made from output to the ground (GND)
Example :
001[RLS1]
The output is switched on when start to play the folder 001
002[RLE0]
The output is switched off at the end of the folder 002
003[RLS1][RLE0]
The output is switched on when start to play the folder 003 and switched
off at the end of the folder
●
[RSSxxx] ou [RSExxx] –
These tags allows to send bytes onto the RS232 output.
