® Waves System
V 1.0 - 2014
I.D. AL - VideoPlayer VP200HDi - Video/Audio player - User manual
- 12 -
●
●
●
●
●
[Vxx] - Volume setting
The name of the folder have an effect on the output volume. This function is used to broadcast
messages loud more or less than others files.
Exemple :
001 [V05] : Volume is set at 5 from 32 step (00 to 31)
001 [V31] : Volume is set at 31, maximum value
001 [V00] : Volume is set at 00, minimum value (Mute)
- If the variation of values exceeds the minimum or maximum values of the player, the levels are
ignored.
●
●
●
●
●
[NT]
-
This option defines the interruption mode of the folder currently read.
If this options is registered within the name of the folder, the read file cannot be interrupted and
instructions received are ignored.
Without this option, the reading of the currently read directory can be interrupted any
time by an external action. (input, RS232 ...)
Example:
001 [NT] - The folder can NOT be interrupted.
In that case, an action on one of the input contacts through RS232 or other is ignored and the reading
of the current file is not stopped.
Caution! The action is not memorised and the triggering information is lost.
●
●
●
●
●
[RESxxxxxxxx]
et
[REExxxxxxxx] - Active or deactive the outputs contacts
The 8 output contacts are switched by the name of the folder when player start to play the folder RES
(Relay Extended when Start) or at the end of the folder REE (Relay Extended at the End).
[RESxxxxxxxx] : xxxxxxxx show the state of the 8 outputs which are activated at the begening of the
folder.
[REExxxxxxxx] : xxxxxxxx show the state of the 8 outputs which are activated at the end of the folder.
With the 2 options you can, for example, switch on a light when player start to play the folder and switch
off the light at the end of the folder.
xxxxxxxx show the 8 outputs : 87654321
If x = 0, the output is not activated, the Mosfet transistor is off
if x = 1, the output is activated, the Mosfet transistor is on and connect the output to the ground.
Example :
001[RES00000001][J002]
Output 1 is activated when player start to play folder 001.
Jump to folder 002 at the end of the folder 001
002[REE00000000]
All outputs are deactivated at the end of the folder 002
003[RES01010101][REE00000000]
Ouputs 1,3,5,7 are activated when player start to play folder
003 are the outputs are deactivated at the end of the folder
