® Waves System
V 1.0 - 2011
I.D. AL - MicroAMP4 - Audio amplifier for headphones - Manual
- 3 -
A.6 - Conditions of use :
• This product has been designed for indoor use only.
• If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the device
switched off until it has reached room temperature.
• Do not shake the device. Avoid brute force when installing or operating the device.
• When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around, for your own safety and that of bystanders.
B. PRODUCT INFORMATION
B.1 Correct usage
The MicroAMP4 is designed to be used with audio headphones.
Correct usage implies observation of the instructions in this manual as well as observing the requirements
concerning installation.
B.2 Incorrect usage
Any other use beyond this is considered as incorrect usage. The manufacturer will not be liable for any
damage resulting from incorrect usage. The operator carries all risks.
B.3 CONTENTS
MicroAMP4
Manual
B.4 TECHNICAL SPECIFICATIONS
Audio amplifier for headphones : MicroAMP4
Power supply nominal values
Power supply: 12V DC
B.5 INSTALLATION
The apparatus must be set up in a dry and dust-free room.
Do not install the player too close to a wall.
B.6 ELECTRICAL CONNECTION
Before use, compare mains voltage with that specified on model plate.
