COBALT Essential
™
Sensor Faucet
Installation Instructions
Part No. 102664 : 4000/4005/4010/4015 Series
I-CON Systems, Inc., for product support call 1-866-730-7192 or visit us online at support.i-con.com
One or more products contained herein are protected by U.S. Patent with other undergoing the patent process www.i-con.com/patents
CONTROL MODULE SETUP
QUICK ACTION BUTTON DIAGRAM
AUTO-RANGE
To set range automatically, press and hold the auto range quick
action button for 3 seconds. Place target at desired detection
range within 5 seconds. A green light on the IR sensor module
will blink once a second during the 5 second countdown. The
sensor will lock onto the target, indicated by solid green light.
The green light will blink 3 times to confirm that the range is set.
ACTIVATE
Activate button toggles water on and off. Water will run up
to the maximum runtime.
INSTALLATION COMPLETE
page 7
Rev 072623
CARE AND CLEANING
DO NOT use commercial cleaning compounds to clean flush
valve. Abrasive or chemical cleaners may dull luster and attack
finishes. Use mild soap and water and then dry with a clean non-
abrasive cloth or towel. A microfiber cloth is recommended. Pro-
tect flush valve from any splattering when cleaning the floor, tile,
or fixtures. DO NOT USE ACID OR ALCOHOL BASED CLEANERS.
