COBALT Essential
™
Sensor Faucet
Installation Instructions
Part No. 102664 : 4000/4005/4010/4015 Series
I-CON Systems, Inc., for product support call 1-866-730-7192 or visit us online at support.i-con.com
One or more products contained herein are protected by U.S. Patent with other undergoing the patent process www.i-con.com/patents
page 1
• All plumbing should be installed according to applicable state
and local codes and regulations
• Before installation of the I-CON sensor faucet, ensure the
lavatory/sink, drain line, and water supply line are properly
installed
• Flush all water supply lines of any debris before making
connections
• Do not use pipe sealant or plumbing grease on any
components or couplings
Adjustable Wrench
Phillips Head
Screwdriver
Electric Drill
with 3/16 Drill Bit
FAUCET ROUGH-IN
TOOLS NEEDED
PRIOR TO INSTALLATION
Gooseneck Sensor Faucet (4000 Series)
Square Mid Body Sensor Faucet (4010 Series)
Round Mid Body Sensor Faucet (4005 Series)
4” Centerset Sensor Faucet (4015 Series)
LIMITED WARRANTY
Rev 072623
I-CON Systems, Inc. (I-CON) warrants that its commercial
manufactured products are made of first-class materials, are
free from defects, and are made to withstand normal use when
installed properly. Products have the following warranty periods:
3 years for COBALT®, COBALT Pro™, and COBALT Connect™
faucets and flush valves and I-CON EDGE® gateways. 1 year for
all other products and decorative finishes. The warranty period
begins on the date of purchase.
Defective products should be sent to I-CON at the customer’s
expense. I-CON will take a reasonable amount of time to
determine if the product is defective and whether it will be
repaired or replaced. During the warranty period, items will
either be (1) repaired at no charge using new replacement
parts or (2) replaced with either a new similar product or one
manufactured from new or serviceable used parts that is at
minimum a functional equivalent to the original. The course of
action will be determined at I-CON’s discretion. Replacement
products that are installed according to the instructions
provided by I-CON will assume the remaining warranty of the
original product. The limited warranty is only applicable to
the product’s materials and workmanship. No claims for labor,
transportation, or other incidental or consequential costs will be
allowed. No extended warranties are available. THE SOLE AND
EXCLUSIVE REMEDY FOR ANY DEFECTIVE PRODUCT IS LIMITED
TO REPAIRING OR REPLACING THE DEFECTIVE PRODUCT. Before
installing and using products, the purchaser is responsible to
determine the products’ suitability and assumes all risks and
liabilities related to the product.
This warranty only applies to persons and organizations that
purchase I-CON products directly from I-CON or an authorized
I-CON representative for the purpose of resale. This warranty
does not apply to the life of batteries or other consumables.
2 18 "
54
3 18 "
79
12 14 "
311
1 14 "
32
75°
5 14 "
133
8"
203
1
4" [6] NPSM
INLET
INSTRUCTION Drawing
TO CHANGE
ANNOTATION SHOULD BE \\i-consystems.int\Operations\CAD Drawings\TEMPLATES\ANSI-INSTRUCTION-TEMPLATE.sldstd
•
SET NORMAL LINE THICKNESS TO .002
•
SET THIN LINE THICKNESS TO .002
•
ADJUST SHEET SCALE TO FILL PAGE
•
SET FRACTIONAL DISPLAY TO VERTICAL
•
SET BENT LEADER LENGTH TO 0.1" IN ANNOTATION AND DIMENSIONING
•
TEXT SHOULD BE ALL CAPS
•
DUAL DIMENSION MEASUREMENT (MILLIMETER) SHOULD MATCH THE FRACTIONAL DISPLAY (INCHES)
•
TEMPLATE INFORMATION
PAGE SIZE 1.75"x2"
•
CENTURY GOTHIC SIZE 5 FONT
•
ONE-TIME SYSTEM SETTING CHANGE
NON-IMPORTED (DRIVEN) AND SKETCH (INACTIVE) SET TO BLACK
•
INACTIVE ENTITIES SET TO BLACK
•
SET PDF EXPORT LINES AND SHADED EDGES TO HIGH QUALITY
•
SET PDF EXPORT SHADED/DRAFT GEOMETRY AND SHARPENED OLE DPI TO 600
•
3 18 "
79
2"
51
4 34 "
121
2 14 "
57
80°
4 34 "
121
1
4" [6] NPSM
INLET
INSTRUCTION Drawing
TO CHANGE
ANNOTATION SHOULD BE \\i-consystems.int\Operations\CAD Drawings\TEMPLATES\ANSI-INSTRUCTION-TEMPLATE.sldstd
•
SET NORMAL LINE THICKNESS TO .002
•
SET THIN LINE THICKNESS TO .002
•
ADJUST SHEET SCALE TO FILL PAGE
•
SET FRACTIONAL DISPLAY TO VERTICAL
•
SET BENT LEADER LENGTH TO 0.1" IN ANNOTATION AND DIMENSIONING
•
TEXT SHOULD BE ALL CAPS
•
DUAL DIMENSION MEASUREMENT (MILLIMETER) SHOULD MATCH THE FRACTIONAL DISPLAY (INCHES)
•
TEMPLATE INFORMATION
PAGE SIZE 1.75"x2"
•
CENTURY GOTHIC SIZE 5 FONT
•
ONE-TIME SYSTEM SETTING CHANGE
NON-IMPORTED (DRIVEN) AND SKETCH (INACTIVE) SET TO BLACK
•
INACTIVE ENTITIES SET TO BLACK
•
SET PDF EXPORT LINES AND SHADED EDGES TO HIGH QUALITY
•
SET PDF EXPORT SHADED/DRAFT GEOMETRY AND SHARPENED OLE DPI TO 600
•
3 18 "
79
2 18 "
54
6 14 "
159
1 14 "
32
80°
5 14 "
133
1
4" [6] NPSM
INLET
INSTRUCTION Drawing
TO CHANGE
ANNOTATION SHOULD BE \\i-consystems.int\Operations\CAD Drawings\TEMPLATES\ANSI-INSTRUCTION-TEMPLATE.sldstd
•
SET NORMAL LINE THICKNESS TO .002
•
SET THIN LINE THICKNESS TO .002
•
ADJUST SHEET SCALE TO FILL PAGE
•
SET FRACTIONAL DISPLAY TO VERTICAL
•
SET BENT LEADER LENGTH TO 0.1" IN ANNOTATION AND DIMENSIONING
•
TEXT SHOULD BE ALL CAPS
•
DUAL DIMENSION MEASUREMENT (MILLIMETER) SHOULD MATCH THE FRACTIONAL DISPLAY (INCHES)
•
TEMPLATE INFORMATION
PAGE SIZE 1.75"x2"
•
CENTURY GOTHIC SIZE 5 FONT
•
ONE-TIME SYSTEM SETTING CHANGE
NON-IMPORTED (DRIVEN) AND SKETCH (INACTIVE) SET TO BLACK
•
INACTIVE ENTITIES SET TO BLACK
•
SET PDF EXPORT LINES AND SHADED EDGES TO HIGH QUALITY
•
SET PDF EXPORT SHADED/DRAFT GEOMETRY AND SHARPENED OLE DPI TO 600
•
80°
4 34 "
121
2 12 "
64
1
4" [6] NPSM
INLET
3 18 "
79
4"
102
6"
152
4 34 "
121
INSTRUCTION Drawing
TO CHANGE
ANNOTATION SHOULD BE \\i-consystems.int\Operations\CAD Drawings\TEMPLATES\ANSI-INSTRUCTION-TEMPLATE.sldstd
•
SET NORMAL LINE THICKNESS TO .002
•
SET THIN LINE THICKNESS TO .002
•
ADJUST SHEET SCALE TO FILL PAGE
•
SET FRACTIONAL DISPLAY TO VERTICAL
•
SET BENT LEADER LENGTH TO 0.1" IN ANNOTATION AND DIMENSIONING
•
TEXT SHOULD BE ALL CAPS
•
DUAL DIMENSION MEASUREMENT (MILLIMETER) SHOULD MATCH THE FRACTIONAL DISPLAY (INCHES)
•
TEMPLATE INFORMATION
PAGE SIZE 1.75"x2"
•
CENTURY GOTHIC SIZE 5 FONT
•
ONE-TIME SYSTEM SETTING CHANGE
NON-IMPORTED (DRIVEN) AND SKETCH (INACTIVE) SET TO BLACK
•
SET PDF EXPORT LINES AND SHADED EDGES TO HIGH QUALITY
•
SET PDF EXPORT SHADED/DRAFT GEOMETRY AND SHARPENED OLE DPI TO 600
•
