08 |
Slim
FM Mode
Press the Mode button (2) to enter the FM mode:
Scan Setting:
By default the FM scan stores all available stations even if the signal
is weak and the audio quality poor. To store just the stations with a strong signal,
follow the steps below.
If there is no operation, the program will automatically exit after 30 seconds.
BBC Radio 1
Signal Error: 27
FM
FM
FM
<Preset Recall >
FM
<Preset Recall >
FM
<Scan setting >
FM
<Audio setting >
Scan setting *
<All stations >
Audio setting *
<Stereo allowed >
90.50MHz
Auto Scanning...
91.95MHz
Auto Scanning...
107.25MHz
Auto Scanning...
Scan setting
<Strong station >
Audio setting
<Forced mono >
BBC Radio 1
Pop Music
BBC Radio 1
64kbps / DAB+
BBC Radio 1
Service not avai
DAB Playing
The first line shows the name of the DAB station. The bottom line, shows various
information.
Press the Info / Menu button (4) to cycle through the information options.
Preset FM Mode
To save and recall a preset station while in FM Radio mode, follow the steps found in
the DAB preset section on page 5.
CAN/
INFO/
ENU
INFO/
ENU
INFO/
ENU
INFO/
ENU
INFO/
ENU
INFO/
ENU
Audio Setting:
By default all stereo stations are reproduced in stereo. For weak
signals, this may result in poor quality audio. The audio quality can be improved by
using the mono only settings. Follow the steps below.
Auto Scanning:
The system searches for all stations from the low-end frequency to the
high-end frequency according to the sensitivity set.
System:
(FM system settings): Same as the DAB mode system settings.
>2s
Factory Reset:
After a reset, all states of DAB saved settings are restored to the
factory default setting.
System
<Factory Reset >
System
<SW version >
SW version
dab-ser-C912-D-
Factory Reset?
<No> Yes
Factory Reset?
No <Yes>
SW version:
View the version of the currently installed DAB software.
INFO/
ENU
INFO/
ENU
INFO/
ENU
