What’s in the Box.
I.AM+ BT Earphones
Micro USB charging cable.
Quick Start Guide
User Guide
Warranty
2.
Headphones operation
Item
Requirement and Description
Power On/Off
Power On: Press and hold the multifunction button for 3 seconds. (release the
button after the white LED bright, the red LED and white LED start flashing
means the device enter pairing mode)
Power Off: Press and hold the multifunction button until the red LED light up.
Red LED turn off means the device power off
Pairing
First paring: Press and hold multifunction button for 3 sec. to power on,
earphones auto-enter pairing mode - LED alternates flashing Red and White.
To paring with your Bluetooth enabled device, go to settings on your device
make sure Bluetooth is switched on.
The earphones appears as “ A.I. Buttons” Select to pair.
Bluetooth pairing after a successful first pairing:
Power off then Press and hold multifunction button for 5 sec. to place
earphones in pairing mode - LED alternates flashing Red and White,
mobile phone search the Bluetooth device to connect the earphones
( earphones ID is “ A.I. Buttons ” )
If the earphones are outside Bluetooth range and disconnect from device,
the earphones will automatically try to re-connect. If reconnection is
unsuccessful for more than 5 mins, the earphones will power off .
Set up use of earphones with multiple devices
1. Pair headphones to device 1
2. Turn off the Bluetooth on device 1, and turn on Bluetooth on phone 2
All manuals and user guides at all-guides.com
