IONIC AIR PURIFIER
®
SELECT
ON \ OFF
SELECT
ON \ OFF
SETUP & OPERATION
This product is designed for operating 24 hours a day and
7 days a week. Follow the steps below.
(Image 2A)
Place the appliance on a level surface a few inches away from the
wall. Plug into a grounded 220V/50Hz outlet.
(Image 2B)
Activate the unit by pressing the ON/OFF
button. The unit will clean, ionise and circulate
the air in a pre-programmed cycle. Select the
desired power level by pressing again to rotate
through the HI, MED, LO. It is recommended
that the unit be set to Medium or Low in smaller
rooms and High for large rooms or living room.
(Image 2C)
If the unit lights up Cleaning Indicator, follow
the maintenance prodedure to clean the blades.
Note:
Please be advised that this unit must be operated indoor only.
Cleaning indicator
Medium
High
Low
Activate button
On-Hi / Med / Low / Off
(Image 2A)
(Image 2B)
(Image 2C)
4.
www.hyvox.com
