Hyundai Yanmar 3TNV82A-B, Руководство пользователя

Страница: 161 / 162

12. Glossary，13. Appendix ――
61
12. Glossary
BS Block Size Variable related to flow control used in ISO15765.
CAN Controller Area Network Communication standard used for in-vehicle LAN.
CSV Comma Separated Value File format used for PCs.
DA Destination Address ID information in CAN communication data.
D-SUB Connector standard.
DTC Diagnostic Trouble Code Coded information for troubles.
ECU Engine（ or Electronic）Control Unit Engine Control Unit is also called ECM.
FFD Freeze Flame Data Related data before and after a trouble.
FMI Failure Mode Identifier Detailed failure information added to DTC.
LID Local Identifier ID information specific to a certain controller.
OC Occurrence Counter Number of DTC occurrences.
PC Personal Computer
PF Protocol Data Unit Format ID information in CAN communication data.
PDM Product Data Management
SA Source Address ID information in CAN communication data.
SAE Society of Automotive Engineers
Sno. Serial Number Manufacturing serial number of engine, pump, and ECU.
SPN Suspect Parameter Number ID commonly used for SAE J1939.
USB Universal Serial Bus Serial communication port used for PCs.
13. Appendix
Appendix：FMI（Failure Mode Identifier）List
FMI Description
0 DATA VALID BUT ABOVE NORMAL OPERATIONAL RANGE
1 DATA VALID BUT BELOW NORMAL OPERATIONAL RANGE
2 DATA ERRATIC,INTERMITTENT OR INCORRECT
3 VOLTAGE ABOVE NORMAL ,OR SHORTED TO HIGH SOURCE
4 VOLTAGE BELOW NORMAL ,OR SHORTED TO LOW SOURCE
5 CURRENT BELOW NORMAL OR OPEN CIRCUIT
6 CURRENT ABOVE NORMAL OR GROUNDED CIRCUIT
7 MECHANICAL SYSTEM NOT RESPONDING OR OUT OF ADJUSTMENT
8 ABNORMAL FREQUENCY OR PULSE WIDTH OR PERIOD
9 ABNORMAL UPDATE RATE
10 ABNORMAL RATE OF CHANGE
11 FAILURE CODE NOT IDENTIFIABLE
12 BAD INTELLIGENT DEVICE OR COMPONENT
13 OUT OF CALIBRATION
14 SPECIAL INSTRUCTIONS
15 NORMAL