Hyundai XG350 2003, Руководство пользователя, Страница: 113 / 161

WHAT TO DO IN AN EMERGENCY WHAT TO DO IN AN EMERGENCY WHAT TO DO IN AN EMERGENCY WHAT TO DO IN AN EMERGENCY WHAT TO DO IN AN EMERGENCY
3-6
SSA3071H
WARNING: WARNING: WARNING: WARNING: WARNING:
Wheels and wheel covers may have sharp Wheels and wheel covers may have sharp Wheels and wheel covers may have sharp Wheels and wheel covers may have sharp Wheels and wheel covers may have sharp
edges. Handle them carefully to avoid pos-
edges. Handle them carefully to avoid pos-
edges. Handle them carefully to avoid pos- edges. Handle them carefully to avoid pos-
edges. Handle them carefully to avoid pos-
sible severe injury.
sible severe injury. sible severe injury. sible severe injury. sible severe injury.
Before putting the wheel into place, be sure
Before putting the wheel into place, be sure Before putting the wheel into place, be sure Before putting the wheel into place, be sure Before putting the wheel into place, be sure
that there is nothing on the hub or wheel
that there is nothing on the hub or wheel that there is nothing on the hub or wheel that there is nothing on the hub or wheel that there is nothing on the hub or wheel
(such as mud, tar, gravel, etc.) that inter-
(such as mud, tar, gravel, etc.) that inter- (such as mud, tar, gravel, etc.) that inter- (such as mud, tar, gravel, etc.) that inter- (such as mud, tar, gravel, etc.) that inter-
feres with the wheel fitting solidly against
feres with the wheel fitting solidly against feres with the wheel fitting solidly against feres with the wheel fitting solidly against feres with the wheel fitting solidly against
the hub. If there is, remove it. If there is not
the hub. If there is, remove it. If there is not the hub. If there is, remove it. If there is not the hub. If there is, remove it. If there is not the hub. If there is, remove it. If there is not
good contact on the mounting surface be-
good contact on the mounting surface be- good contact on the mounting surface be- good contact on the mounting surface be- good contact on the mounting surface be-
tween the wheel and hub, the wheel nuts
tween the wheel and hub, the wheel nuts tween the wheel and hub, the wheel nuts tween the wheel and hub, the wheel nuts tween the wheel and hub, the wheel nuts
could loosen and cause the loss of a wheel.
could loosen and cause the loss of a wheel. could loosen and cause the loss of a wheel. could loosen and cause the loss of a wheel. could loosen and cause the loss of a wheel.
Loss of a wheel may result in loss of control
Loss of a wheel may result in loss of control Loss of a wheel may result in loss of control Loss of a wheel may result in loss of control Loss of a wheel may result in loss of control
of the vehicle. This may cause serious injury
of the vehicle. This may cause serious injury of the vehicle. This may cause serious injury of the vehicle. This may cause serious injury of the vehicle. This may cause serious injury
or death.
or death. or death. or death. or death.
D060H02Y-AAT
7. Reinstall Wheel Nuts 7. Reinstall Wheel Nuts
7. Reinstall Wheel Nuts 7. Reinstall Wheel Nuts 7. Reinstall Wheel Nuts
YL30140A
To reinstall the wheel, hold it on the studs, put
the wheel nuts on the studs and tighten them
finger tight. The nuts should be installed with
their small diameter ends directed inward. Jiggle
the tire to be sure it is completely seated, then
tighten the nuts as much as possible with your
fingers again.
D060G02Y-AAT
6. Changing Wheels 6. Changing Wheels
6. Changing Wheels 6. Changing Wheels 6. Changing Wheels
SSA3070H
Loosen the wheel nuts and remove them with
your figers. Slide the wheel off the studs and lay
it flat so it cannot roll away. To put the spare
wheel on the hub, pick up the spare tire, line up
the holes with the studs and slide the wheel
onto them. If this is difficult, tip the wheel slightly
and get the top hole in the wheel lined up with
the top stud. Then jiggle the wheel back and
forth until the wheel can be slid over the other
studs.