FEATURES OF YOUR HYUNDAI
1- 16
B220A02Y
WARNING:
o When using the rear seat center belt, you
must lock all metal tabs and buckles. If
any metal tab or buckle is not locked, it
will increase the chance of injury in the
event of collision.
o Never unlock the metal tab (a) and the
buckle (b) with the following exceptions.
(1) In case of folding rear seatbacks down.
(2) If transporting an object on the rear
seat may cause damage to the rear
seat center belt.
o Lock the metal tab (a) and the buckle (b)
immediately after folding rear seatbacks
up.
o To disconnect the metal tab (a) from the
buckle (b) , insert a sharp-ended tool into
the groove located on the buckle (b).
1. Before fastening the rear seat center belt,
confirm the metal tab (a) and buckle (b) are
latched together.
2. After confirming that (a) and (b) are latched,
pull the seat belt out of the retractor and
insert the metal tab (c) into the buckle (d).
There will be an audible "click" when the tab
locks in the buckle. The seat belt automatically
adjusts to the proper length only after the lap
belt is adjusted manually so that it fits snugly
around your hips. If you lean forward in a slow,
easy motion, the belt will extend and let you
move around. If there is a sudden stop or
impact, the belt will lock into position. It will also
lock if you try to lean forward too quickly.
B220A02Y-AAT
SEAT BELTS - Rear Seat Center's 3-
Point System With Emergency Lock-
ing Retractor (If Installed)
(a)
(b)
(c)
(d)
B210A01A-AAT
To Release the Seat Belt
YR10321B
The seat belt is released by pressing the release
button in the locking buckle. When it is released,
the belt should automatically draw back into the
retractor.
If this does not happen, check the belt to be sure
it is not twisted, then try again.
too high on your waist, it may increase the
chance of injury in the event of a collision.
Both arms should not be under or over the
belt. Rather, one should be over and the
other under, as shown in the illustration.
Never wear the seatbelt under the arm near-
est the door.
B220A01E
Содержание XG300 2001
Страница 1: ...2001 D R I V I N G IS B E L I E V I N G...