1- 8
FEATURES OF YOUR HYUNDAI
B070A01S-AAT
THEFT-ALARM SYSTEM
(If installed)
This system is designed to provide
protection from unauthorized entry into
the car. This system is operated in
three stages: the first is the "Armed"
stage, the second is the "Alarm" stage,
and the third is the "Disarmed" stage.
If triggered, the system provides an
audible alarm siren.
B070B03Y-AAT
Armed Stage
Park the car and stop the engine. Arm
the system as described below.
1) Remove the ignition key from the
ignition switch.
2) Make sure that the engine hood and
trunk lid are locked.
3) Lock the doors using the transmitter
of the keyless entry system.
o When pushing the rear portion of
the switch, all vehicle doors will
unlock.
!
After completion of the steps above,
the turn signal light will blink once to
indicate that the system is armed.
NOTE:
1) If any door, trunk lid or engine
hood remains open, the system
will not be armed.
2) If this happens, rearm the system
as described above.
CAUTION:
Do not arm the system until all
passengers have left the car. If the
system is armed while a
passenger(s) remains in the car,
the alarm may be activated when
the remaining passenger(s) leaves
the car.
HXGS123
B070C03L-AAT
Alarm Stage
The alarm will be activated if any of the
following occurs while the car is parked
and the system is armed.
1) A front or rear door is opened with-
out using the transmitter.
2) The trunk lid is opened without us-
ing the transmitter.
3) The engine hood is opened.
The turn signal light will blink continu-
ously and the siren will sound for 27
seconds. (EC only/Except E.C: 3
times). To turn off the system, unlock
the door or trunk lid with the transmit-
ter.
