EN - 16
Language
Sunday Monday Tuesday Wednesday Thursday Friday
Saturday
German, GER
SON
MON
DIE
MIT
DON
FRE
SAM
English, ENG
SUN
MON
TUE
WED
THU
FRI
SAT
Danish, DAN
SON
MAN
TIR
ONS
TOR
FRE
LOR
Dutch, DUT
ZON
MAA
DIN
WOE
DON
VRI
ZAT
Italian, ITA
DOM
LUN
MAR
MER
GIO
VEN
SAB
Spanish, SPA
DOM
LUN
MAR
MIE
JUE
VIE
SAB
French, FRE
DIM
LUN
MAR
MER
JEU
VEN
SAM
Russian, RUS
BC
NH
BT
CP
YT
NT
CY
Note:
•
The Time zone is used for the countries where can receive the DCF time signal but the time
zone is different from the German time.
•
When the country time is faster than the German time for 1 hour, the zone should be set
to +1. Then the clock will automatically set 1 hour faster from the signal time received.
•
Second adjusted to zero only.
4.3 Alarm Clock Function:
•
Press “ALARM SET” button to select to view the alarm time (AL1, AL2, AL3, AL4) the
corresponded alarm icon “ ” or “ ”or “ ” or “ ” would flash.
•
When viewing the alarm time, hold “ALARM SET” button to enter the setting of alarm time,
press “▲” or “▼”button to adjust the alarm time, press “ALARM SET” button to confirm the
setting. Setting sequence is alarm hour, alarm minute.
•
Press “AL 1 2 ON/OFF “button to activate the alarm1 or 2. When alarm is activated, alarm
icon „ ” or „ ” shown on the display
•
Press “AL 3 4 ON/OFF “button to activate the alarm3 or 4. When alarm is activated, alarm
icon „ ” or „ ” shown on the display
•
Press “SNOOZE” button when alarm alerts. The alarm snoozes for around 5 minutes, then
it alerts again. Alarm icon flashes on the LCD during the snooze time. This process can be
repeated 7 times.
•
Except “SNOOZE” button, press any buttons to stop the alarm. Otherwise, the alarm signal
sounds for about 2 minutes, then stops automatically.
4.4 Thermometer
•
After start-up the clock will measure the current temperature automatically.
•
The temperature measurement range is -9.9°C to +50°C. If the temperature is out of the
measurable range, LL.L (beyond the minimum temperature) or HH.H (beyond the maximum
temperature) will be shown on the LCD.
REMARK:
If the unit shows values that are obviously incorrect, you can reset it the unit.
Take a pointed object, and insert it into the RESET opening.
