Hyundai WSC, Инструкция по эксплуатации, Страница: 13 / 20

ENG
ENG - 11
THERMO SENSOR UNIT APPEARANCE:
D1: Transmission Indication LED
D2: Outdoor Temperature
D3: Wall Mount Hole
D4: Channel Select Switch
D5: Battery Compartment
D6: “°C/°F” button
D7: “TX” button
D8: Stand
D9: Temperature Sensor Probe and Plug
SETUP:
• Insert batteries.
THERMOMETER:
• Press “°C/°F” button (D6) to select Temperature to be displayed in Celsius mode
or Fahrenheit mode.
Registration to receiver Procedure:
• The receiver automatically starts receiving transmission from Thermo Remote Sensor after
start-up. And display on Outdoor temperature digits blinks.
• Insert the batteries in the Thermo Sensor Unit. The sensor unit automatically transmit
temperature to the receiver unit. (Battery compartment (D5) of thermo sensor is located
behind the back cover, unscrews to open.)
• For having more than one Rempte Sensor (Maximum3), select the Channel, CH1, CH2 or
CH3 to ensure each sensor is transmitting at difference channel before inserting batteries.
The Channel select switch (D4) is at the back of the thermo sensor unit.
• Press “TX” button (D7) on the thermo sensor unit to transmit temperature to the receiver unit
manually. The receiver unit gives a “beep” sound if it received the temperature.
The use of 1.5m cord Temperature Probe:
• Insert the probe plug (D9) on the right hand side of the Thermo Sensor Unit.
• Put the metal casing outside and leave the Thermo Sensor Unit in an indoor area to avoid
freezing up the battery when the outdoor temperature is below -20 °C.
• Always use the temperature probe to sense the temperature when the temperature is
between the following range: 50 °C ~ 0 °C and +50 °C ~ +70 °C