Hyundai WSC 1974, Инструкция по эксплуатации

Страница: 18 / 24

EN - 18
The zone is used for the countries where can receive the DCF signal but the time zone is diff -
erent from the German time.
When the country time is faster than the German time for 1 hr, the zone should be set to 1.
Then the clock will automatically set 1 hour faster from the signal time received.
12/24 Hour Display mode:
Press “ 12/24 ” button (B2) to select 12 or 24 hours mode.
Thermometer:
Press “ C/F ” button (B5) to select Temperature to be displayed in Celsius mode or Fahren -
heit mode.
Alarm Clock Function:
Press “MODE/SET” button (B1) to select to view :
Time Alarm Time (“AL “Shown on screen)
When viewing the Alarm Time, hold “MODE/SET” button (B1) for 3 seconds to enter Alarm
Time setting. Press “ + ” button (B4) or “ - ” (B5) buttons to adjust the alarm time.
Push the “Alarm ON/OFF” slide switch (B6) to switch alarm on or off. If it is on, “ ” shown
on the LCD.
Press any button to stop the alarming.
Note:
Use a pin to press the “reset”(B7) button to reset the unit if the Unit does not work properly.
Avoid placing the clock near interference sources/metal frames such as computer or TV sets.
Buttons will not function while scanning for DCF time signal unless they are well received or
stopped manually.
All Setting Mode will automatically exit in 15 seconds without any adjustment.
•
•
•
•
•
•
•
•
•
•
•
•
•