ENG
ENG - 59
DISPLAy BACKLIGHT
Press MODE/SNOOZE/LIGHT for an extended backlight.
LOW BATTERy INDICATION
Low battery indication is available for the main unit, USB transmitter & remote sensor. Replace
the batteries and follow the setup procedure in this instruction manual.
Low battery indicator
Main unit:
Below the “IN” icon
USB transmitter:
Below the “Last Update” box
Remote thermo sensor:
Next to the “CH 1 2 3” icons
IMPORTANT NOTE:
After battery replacement, you are required to set up the RF connection again.
Main Unit & USB Transmitter:
Press [PC Search] on main unit, then press [TRANSMIT] on
USB transmitter.
Main Unit & Remote Sensor:
Hold [CH/SEARCH] on main unit, then press [TRANSMIT] on
remote sensor.
USB TRANSMITTER
Press [PC Search] on the main unit and then press [TRANSMIT] on the USB transmitter to en
-
force transmitting RF weather data and set up the RF connection with the main unit.
(See “USB TRANSMITTER & PROGRAM INSTALLATION” section to set up the USB
transmitter).
NOTE:
-
To run the PC program, ensure that your USB transmitter is connected properly to the PC via
an USB port.
-
When weather data is transmitted from the USB transmitter, the red LED light will flash.
Содержание WS2194 INTERNET
Страница 73: ...Pozn mky Notatka Notes...
Страница 74: ...Pozn mky Notatka Notes...
Страница 75: ...Pozn mky Notatka Notes...
Страница 76: ......