Hyundai WS2094 INTERNET, Инструкция по эксплуатации

Страница: 53 / 72

ENG
ENG - 53
USB TRANSMITTER & PC PROGRAM INSTALLATION
BATTERy INSTALLATION & USB CONNECTION
Slide to open the battery door on the bottom of the USB transmitter, insert 3 pieces of AAA
batteries according to the polarity indicated. Close the battery door.
Connect USB transmitter to your PC via an USB port.
PC PROGRAM INSTALLATION
Before installation, ensure that
1) Your PC is connected to the Internet. Try browsing through a couple of websites to make
sure.
2) You are using Windows 2000, XP or Vista.
3) USB transmitter is connected properly to your PC via the USB port.
Insert CD into your CD ROM and double click the “INSTALL_1940.EXE” or ”NIS01_
INSTALL_1940.EXE” program to start installation. If the installation program detected that
Microsoft .NET Framework 2.0 driver was not installed in your Windows before, it will prompt
you to install the driver. Follow the instruction to install the driver and complete the rest of the
installation.
After the installation is completed, run the program by double clicking the desktop “4-DAY
FORECAST” icon . Then click [SETTING…] in the HOME WEATHER display. Click [SET
LOCATION] to enter your home city in the program.
After setting your home location, 4-day forecast of your home city will be updated on your
PC program automatically via the Internet. You may click [UPDATE FORECAST] anytime
to manually update the forecast display on the program. The program will also update the
forecast and send to the main unit automatically if your PC is online all the time or every time
you turn on your PC.
NOTE: Refer “TROUBLESHOOTING” section if you have problem displaying 4-day forecast
information on your PC program.
ESTABLISH RF CONNECTION WITH MAIN UINIT
Before setting up the RF connection, please ensure that you have successfully received 4-
day forecast on your PC program for your home city.
Place the USB transmitter & main unit away from metal & source of interference such as PC
monitor, mobile phones, appliances, TV etc. It is recommended to start with a short distance
(eg. within 0.5 meter) between the two units for initial RF setup. Once the RF connection is
established, place the main unit within the effective transmission range from the transmitter.
Shorten the distance if necessary for best reception.
To search for RF signal from a new USB transmitter, press [PC SEARCH] button on the main
unit repeatedly until the RF icon flashes.
Press [TRANSMIT] button on the
USB transmitter to enforce transmitting RF weather data to the main unit.
Once the RF connection is established between the main unit & USB transmitter, the RF icon
“ “with full strength will appear on the main unit. In the first few minutes of the RF recepti -
on, the main unit is showing data on one part of the screen and this is normal. The rest of the
screen display data will gradually appear in the next 10 minutes or more.
NOTE:
If you have waited half an hour or more without seeing the rest of the screen, shorten the
distance between the USB transmitter & main unit, check the battery levels and repeat the
setup procedure above.
If it continues to fail, try removing the USB connection and all batteries from the USB trans -
mitter. Reinstall the batteries and then reconnect the USB connection again. Repeat above
procedure to set up the RF connection.
-
-
-
-
-
-
-
-
-
-
-
-
-