EN - 8
1. FEATURES
1.1 Wireless Outdoor Sensor
-
Wall Mount or Table Stand
-
433MHz RF transmitting frequency
-
30 meter [98 feet] transmission range in an open area
2. OUTDOOR THERMO SENSOR
D1: LCD Display
D5: “C/F” Button
D2: Wall Mount Hole
D6: Channel Select Switch
D3: Battery Compartment
D7: Temperature Probe Plug
D4: “RESET” button
D8: Stand
3. GETTING STARTED
3.1 Outdoor Thermo Sensor
•
Batteries compartment (D3) of thermo sensor is locating behind the back cover, unscrews
the batteries cover to open.
•
Insert 2 x AAA batteries observing polarity [ “+” and “–” marks]
•
The remote sensor should be securely mounted onto a horizontal surface.
Note:
Transmissions between receiver and transmitter can reach up to 30m in open area.
Open Area: there are no interfering obstacles such as buildings, trees, vehicles, high voltage
lines, etc.
4. RF TRANSMISSION
•
The thermo sensor unit will automatically transmit temperature signal to the main unit after
batteries inserted.
•
For having more than one external transmitter (Maximum3), select the Channel, CH1, CH2
or CH3 to ensure each sensor is transmitting difference channel before inserting batteries.
The channel select switch (D5) is at the back of the thermo sensor.
5. THE USE OF 1.5 M CORD TEMPERATURE PROBE
•
Insert the probe plug (D6) to the jack on the right hand side of the Thermo Sensor Unit.
•
Put the metal casing outside and leave the Thermo Sensor Unit in indoor area to avoid
freezing up the battery when the outdoor temperature is below -20 °C.