Hyundai WS 2468, Инструкция по эксплуатации

Страница: 22 / 36

EN - 22
Initial operation:
• Open the Weather Station battery compartment cover
• Insert 2 x AA batteries observing polarity[„+• and“-“ marks]
• When you insert the batteries, all the icon on the LCD will light up for 3 seconds, and you will
hear a beep tone, then detect indoor temperature & humidity.
• The Weather Station will now start to make a connection to the outdoor remote sensor.
This operation takes about 3 minutes and is displayed by a flashing reception RF antenna
symbol in the OUTDOOR“ display area on the receiver.
• This now, Open the remote Sensor battery compartment cover, Insert 2 x AAA batteries
observing polarity [„+“ and „-“ marks]
• After receiver has created a connection to the outdoor remote sensor, After 3 minutes
it will enter the Radio control time receive mode.
Reception of the Radio signal:
• The clock will automatically search the DCF signal after 3 minutes of any restart or changing
of new fresh batteries. The radio mast icon starts to flash.
• At 1 :00 /2:00 I 3:00 AM, the clock automatically carries out the synchronization procedure
with the DCF signal to correct any deviations to the exact time. If this synchronization
attempt is unsuccessful (the radio mast icon disappears from the display), the system will
automatically attempt another synchronization at the next full one hour. This procedure is
repeated automatically up to total 5 times.
• To start manual DCF signal reception, press and hold the „

“ button for two seconds.
If no signals received within 7 minutes, then the DCF signal search stops (the radio mast
icon disappears) and start again at the next full one hour.
• During RC reception, To stop searching radio signal, press the „

“ button once.
F.Y.I.:
• A flashing radio mast icon indicates that the DCF signal reception has started
• A continuously displayed radio mast icon indicates that the DCF signal was received
successfully
• We recommend a minimum distance of 2.5 meters to all sources of interference, such
as televisions or computer monitors
• Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices.
In such extreme circumstances, place the system close to the window.
• During the RC receive mode, only the ,, SNOOZE/LIGHT “ and „

“ buttons have a function,
other buttons are not functional, If you want to carry out other functions of operation, please
press „

“ button to exit the RC receiving mode.
Manual time setting:
• Press and hold the“ MODE “ button for 2 seconds, the temperature unit starts to flash.
• Now use „

“ and „

“ buttons to set the temperature unit in °C or °F you need.
• Press “ MODE “ button to confirm your setting, the 12/24HR start to flash.
Now use „

“ and „

“ buttons to set the 12/24 hour mode you need.
• Press „
MODE
“ to confirm your setting, the Time zones starts to flash.
Now use „

“ and „

“ buttons set a correct ti me zone (-12 to + 12).
• Press „ MODE “ to confirm your setting, the Hour display starts to flash.
Now use „

“ and „

“ buttons to set the correct hour.
• Press “ MODE “ to confirm your setting, the Minute display starts to flash.
Now use „

“ and „

“ buttons to set the correct minute.
• Press „ MODE “ button to confirm your setting, the weather forecast pattern display starts
to flash. Now use „

“ and „

“ buttons to select the current weather pattern.