Hyundai WS 2215, Инструкция по эксплуатации

Страница: 23 / 44

EN
EN - 23
3. OUTDOOR THERMO SENSOR
D1: Transmission Indication LED
D2: Outdoor Temperature display
D3: Outdoor Humidity display
D4: Battery Compartment
D5: Wall Mount Hole
D6: “RESET” button
D7: “C/F” button
D8: Temperature Probe Plug & Jack
D9: Stand
4. GETTING STARTED
4.1 Main Unit:
• Slide open main unit battery compartment cover [C3]
• Insert 2 x AAA batteries observing polarity [“+” and “–” marks]
• Replace main unit battery compartment cover [C3]
• Use a pin to press the RESET [B3] button on the rear of the main unit, the main unit is now
ready for use.
4.2 Outdoor Thermo Sensor
• Batteries compartment (D4) of thermo sensor is locating behind the back cover, unscrews
the batteries cover to open.
• Insert 2 x AAA batteries observing polarity [“+” and “–” marks]
5. INSTALLATION
5.1 Main Unit
The main unit can be placed onto any flat surface (C2), or wall mounted by the hanging hole (C1)
at the back of the unit.
5.2 Outdoor Sensor
The remote sensor should be securely mounted onto a horizontal surface.
Note:
Transmissions between receiver and transmitter can reach up to 30 m in open area.
Open Area: there are no interfering obstacles such as buildings, trees, vehicles, high voltage
lines, etc.