EN
EN - 49
NOTE:
Whenever the radio-controlled icon
is flashing on the display, the weather station
is receiving radio-controlled clock signal and the RF reception for remote sensors will stop
temporary for around 8 minutes. Wait until this icon stops flashing (or disappear) before
searching for the remote sensors.
Anemometer (with built-in temperature & humidity sensor):
Important:
Wind direction calibration is needed whenever the anemometer is reset
(or during battery replacement)
Searching mode display:
Wind direction, temperature & humidity information will flash
Rf Connection completed:
Valid wind speed/direction & Ch-1 temperature/humidity readings appear
(It may take up to 10 minutes to receive all wind speed/direction & Ch-1 temperature/humidity
readings during the searching mode)
Rf Connection failed:
“
- - - -
“ wind speed appears; no wind direction. Unable to display Ch-1 temperature & humidity
RAIN GAUGE:
Searching mode display:
Total rainfall information will flash
Rf connection completed:
Valid total rainfall reading appears
Rf connection failed:
“
- - - -
“ stops flashing & stays on the total rainfall display (previous daily/weekly/monthly rainfall
readings remain in record)
Additional remote thermo-hygrometer sensor:
Additional remote thermo-hygrometer sensors can be purchased separately
(not supplied in the package).
Important:
Select Ch-2 or 3 for additional remote thermo-hygrometer sensor since Ch-1 has
been assigned to the anemometer.
Searching mode display:
Temperature & humidity information will flash
Rf Connection completed:
Valid temperature/humidity readings of your selected channel appear
Rf Connection failed:
Unable to display the temperature & humidity readings of your selected channel
Содержание WS 2077 R WIND
Страница 58: ...Poznámky Notatka Notes ...
Страница 67: ...Poznámky Notatka Notes ...
Страница 68: ......