Hyundai VC 028, Инструкция по эксплуатации

Страница: 30 / 48

EN - 30
– Never use the appliance for any other purpose than for the intended one described in these
instructions for use!
– All text in other languages and pictures shown on the packaging, or the product itself, are
translated and explained at the end of this language mutation.
– WARNING: There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
– The manufacturer is not responsible for damage caused by improper use of the appliance
and the accessories and its warranty for the appliance does not apply in situations when
the safety warnings above are not complied with. Failure to replace or maintain all filters
regularly according to the instructions in Chapter
IV.
,
V.
and also using non-original filters, the
properties of which resulted in failure or damage of the vacuum cleaner, is also understood to
be improper use of the appliance.
II. EQUIPMENT AND ACCESSORIES (Fig. 1)
A – vacuum cleaner
A1 – 0/I (ON/OFF) button A4 – handle
A2 – indicator light dust bin arrest A5 – crevice nozzle
A3 – container lock button A6 – crevice nozzle arrest button
B – dust container
B1 – HEPA filter B3 – filter protector
B2 – holder filter
C – extension adapter
C1 – 0/I (ON/OFF) switch button C4 – handle
C2 – vacuum cleaner lid lock button C5 – floor nozzle with rotation brush
C3 – handle lid lock buttons C6 – indicator light
D – support
D1 – power supply hub D3 – suspension mould
D2 – indicators light
E – support F – power adaptor
E1 – lock button
III. VACUUM CLEANER PREPARATION
Remove all packing material, take out the vacuum cleaner and the accessories.
Assembling holder (i.e. charging base)
Insert support
D
to holder E by slight pushing to the maximum position (you will hear
a snapping sound). To remove the support from the holder you have to push lock button
E1 and then to pull the support out (Fig. 2).
Fastening of the holder to the wall (it applies to D)
Fasten the support
D
close enough to the electric socket using suibatle bonding material.
Make sure that there is no electric, telephone, plumbing fittings under the plaster at the place
of mounting the holder. Then slide the vacuum cleaner A to the holder together with the
accessories ( B, C ), (Fig. 3).
Assembling extension adapter
Straighten the handle of extension adapter C to the maximum working position (you will
hear a snapping sound). For tilting the handle you have to push lock button C3 (Fig. 3).