Hyundai VC 020B, Инструкция по эксплуатации

Страница: 18 / 36

ENG - 18
UNPACKING AND ASSEMBLY
Check that all the parts in the box.
1. Fit the brush by carefully inserting it into the vacuum compartment.
2. Position the charging station close to a mains socket (well away from heat sources or wet
places). Insert the adaptor into the mains socket and connect the charging station.
VACUUMING FLOORS AND CARPETS
You should regularly check that the brush are clean in order to avoid scratching sensitive floors.
Start the device by pushing the on/off button away from you.
VACUUMING TABLES, FURNITURE, CAR SEATS ETC.
Remove the hand unit by pressing in the release buttons.
EMPTYING/CLEANING
Careful cleaning of the dust container and filters
1. Remove the whole dust container by pressing the release button and turning
the dust container off.
2. Pulling out the filters and emptying the contents of the dust container into a suitable vessel
or bag. (The filter can be shaken clean or cleaned and rinsed using warm water. Make sure
that the parts are dry before they are assembled.)
3. Re-install the components
Firstly Re-install the filter after the filter baffle plate in the dust container. Place to match up
with the both ventilation positions. Secondly assembling the dust container following
up the opposite procedures when detaching the dust container.