ENG - 36
NOTE
: If there are several folders in the USB or MP3 disc , it is necessary to program folders
first and then the tracks. Press the
10/FOLD./M.+
and
10/FOLD./M.-
to select the first
folder you want to program. After that, press /
TUN.+
or /
TUN.-
button to chose the
first desired track to be programmed, press the
PROG./P-MODE
button to enter. The
display changes to show
P02
.
REPEAT
To Repeat a Single Track
1) Press the
PROG./MEM./P-MODE
button once in play mode, “
REP-1
” will show steady on
the display. The current track will be played repeatedly until the
STOP
button is pressed.
2) To cancel Repeat function, press the
PROG./MEM./P-MODE
button until the “
REP-1
”
disappear on the LCD display.
To repeat all the Tracks
1) Press
PROG./MEM./P-MODE
button in play mode till the “
REP-ALL
” shows steady on the
display, all tracks on the disc will be played repeatedly until the
STOP
button is pressed.
2) To cancel Repeat function, press the
PROG./MEM./P-MODE
button until the “
REP-ALL
”
disappear on the LCD display.
To repeat current folder (for MP3 only)
1) Press
PROG./MEM./P-MODE
button in play mode, till the “
REP-ALBUM
” shows steady on
the display, the current folder will be played repeatedly until the
STOP
button is pressed.
2) To cancel Repeat function, press the
PROG./MEM./P-MODE
button until the “
REP-ALBUM
”
disappear on the LCD display.
RANDOM PLAY
Press the
PROG./MEM./P-MODE
button in play mode till the “
RADOM
” shows steady on the
display, the random play will start immediately until all tracks are played over and then stop.
Press the
PROG./MEM./P-MODE
button once to cancel.
INTRO
Press the
ROG./MEM./P-MODE
button on unit in play mode till the “
INTRO
” shows steadily on
the display, the intro play will start and scan 10 seconds for every track. To cancel intro play,
press the
ROG./MEM./P-MODE
button until “INTRO” disappear from the display.
USB OPERATION
1) Press the
STANDBY/FUNCTION
button to choose USB mode.
2) Connect the USB to the USB INPUT. The LCD will show the total number of tracks and
folders stored in the USB. After reading the USB (The unit can support up to 32 G USB
device), the unit will start playback automatically.
3) Press the
button on unit to stop playing. The display will show total number of USB and
folders and
STOP
.
4) Proceed repeat play (repeat 1- repeat folder - repeat all-INTRO)/program play/skip up and
back operation as the same described in above “CD/MP3 OPERATION”.
CAUTION:
Do not use any USB extension cable for connecting the USB bar which may cause harmful
interference.
