Hyundai TRC 533 AU3BR, Инструкция по эксплуатации

Страница: 28 / 44

ENG - 28
POWER SOURCE
This unit is designed to be operated on AC/DC.
AC OPERATION
Plug the smaller end of AC power cord into AC jack on unit and the other bigger end into
household AC wall outlet. The batteries will be automatically disconnected.
DC OPERATION
Open the BATTERY COMPARTMENT DOOR. Install 6 pcs UM-2/C size batteries (not included)
into compartment. Please follow correct polarities as indicated.
CAUTION:
• Remove batteries if they are exhausted or long time use.
• Batteries contain chemical substances, so they should be disposed of properly.
BASIC FUNCTION
SWITCHING ON THE UNIT
Press and hold button to turn the unit on or off.
Note : In CD/MP3/USB/AUX mode, when the unit is not providing the main function for 15 minutes,
the unit will automatically switch into standby mode. Press the button to turn on the unit again.
Please note that low volume setting in the audio source may be recognized as “no audio signal”,
this will affect the capability of signal detection from the device and can also originate an automatic
switch into standby mode. If this happens please reactivate the audio signal transmission or
increase the volume setting on the audio source player in order to resume playback.
Electrostatic Discharge hints – The unit may reset or may not reset to normal operation mode due
to electrostatic discharge, just switch it off and reconnect again.
SETTING THE FUNCTION MODE
There are 3 function modes; press the button to change modes. The 3 modes are:
• TUNER: Listen to FM radio broadcasts.
• CD: Play compact discs (CD-audio or CD-MP3).
• USB: Play MP3s from USB memory sticks.
• AUX: Play external audio source through AUX IN jack.
The current function mode will be shown on the display when you turn on the boom box.
TO ADJUST VOLUME
Press VOL.+/- button to increase or decrease volume.
RADIO OPERATION
1) Press the until to select the FM band(this unit is designed for FM ONLY).
2) Tune to desired station by press the

/TUN- or

/TUN+ on unit, the display will show the
band frequency. Example: FM 97.10 MHz.
3) Extend FM ANTENNA to its full length and gently move the unit back and forth to get the best
reception, or place the unit in an open location.
4) Press the button to select other functions, or turn off the unit.