Hyundai SONATA hybrid, Руководство по аварийному реагированию, Страница: 7 / 31

3. Disable direct hazards / safety regulations
The final step in the initial response process, conducted after immobilizing the vehicle, is to
disable the vehicle, its SRS components and the high voltage electrical system. To prevent
current flow through the system, use one of the following procedures to disable the vehicle.
3.1 Disabling the System – Smart Key System and “POWER”
START/STOP Button
1. Confirm the status of the READY light on the instrument panel. If the READY light
is illuminated, the vehicle is ON.
“POWER” START/STOP Button
a) If the READY light is NOT illuminated, the vehicle is off. Do not push the “POWER”
START/STOP button because the vehicle may start (go into READY mode).
b) To turn OFF the system, press the 'P' (Park) button, and press the POWER button.
Case I
Case II
Fuse removal
(Fuse box)
12 volt battery
disconnection
High voltage
shut off
*In case of the vehicle cannot be disabled using the “power” button.
Power Off
12 volt battery
disconnection
High voltage
shut off
Position the shift lever in the Park (P)
6