manualshive.com logo in svg

Hyundai Sonata 2017, Руководство пользователя, Страница: 34 / 563

Поделиться
Скачать
Hyundai Sonata 2017 Скачать руководство пользователя страница 34

2-17

Saf

ety system of y

our v

ehicle

2

If you recline the seatback towards
the front with the head restraint
and seat cushion raised, the head
restraint may come in contact with
the sunvisor or other parts of the
vehicle.

Removal/Reinstallation

To remove the head restraint:
1. Recline the seatback (2) rearward

using the seatback angle lever/
switch (1).

2. Raise the head restraint as far as it

can go.

3. Press the head restraint release

button (3) and the access hole (4)
with a tool (e.g. pin) while pulling
the head restraint up (5).

NOTICE

OLF034015

OLF034011N

OLF034012N

■

Manual seat

■ 

Power seat

Содержание Sonata 2017




















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов