Hyundai SI 2188B, Инструкция по эксплуатации

Страница: 31 / 36

ENG - 31
ENG
Release the self clean button as soon as all the water in the tank has been used up.
CARE AND CLEANING
Disconnect from the mains supply by removing the plug.
Certain fabric finishresiduesmaybuilduponthesoleplate,thesemayberemovedby cleaning with a
rough cloth soaked in a vinegar water solution. Dry with a cloth.
Do not use abrasives or scouring pads to clean the soleplate. Keep the soleplate smooth:
avoid hard contact with metal objects. Do not scratch or damage the surface of the soleplate.
Wipe the outside housing with a damp cloth and polish with a dry one. Do not use abrasives
or harsh cleaners as they may damage the surface of the iron.
Never immerse the iron in water or any liquids.
Do not put vinegar or other descaling agents into the water tank.
To clean steam holes - simply use a damp cloth to wipe away any build up of lint or starch
from inside steam holes.
The iron must be used and rested on a stable surface.
When placing the iron on its stand, ensure that the surface on which the stand is placed is
stable.
The iron should not be used if it has been dropped, if there are visible signs of damage or if t
is leaking.
The appliance should not intended for use by children or other persons without assistance or
supervision if their physical, sensory or mental capabilities prevent them from using it safety.
Children should be supervised to ensure that they do not play with the appliance.
Troubleshooting
Problem Possible cause Solution
The iron is plugged in but the
soleplate is cold.
There is connecton problem.
Check the main cord, the plug
and the wall socket.
lThe iron does not produce
any stream.
There is not enough water in
the water tank.
Fill the water tank.
The stream kontrol has been
set to positron.
Set the stream control to hi -
gher position.
The iron is not hot enough. Selectan ironing temperatu -
re that is suitable for stream
ironing. Put the iron on its heel
and wait until the amber pilot
has gone out before you start
ironing.
Water droplets drip onto the
fabric.
The cap of the filling opening
has not been closed properly.
Close the cap properly. You
will hear a click
Flakes and impurities come
out of the soleplate during
ironing.
You have been using hard
water, which has caused
scale flakes to develop inside
soleplate.
Use the self- clean function a
few times.
•
•
•
•
•
•
•
•
•
•
•
•