Hyundai SANTAFE Plug-in hybrid, Руководство по аварийному реагированию

Страница: 10 / 24

Emergency procedures
Disable
The final step in the initial response process, conducted after the vehicle is secured to prevent
movement, is to disable the vehicle, its SRS components and the high voltage electrical system. To
prevent current flow through the system, use one of the following procedures to disable the
vehicle.
Ⅰ. Disabling the system – Smart Key System and “POWER” START/STOP BUTTON
8
1. Check the status of the READY light on
the instrument panel. If the READY light is
illuminated, the vehicle is on.
(Refer to page 5)
a) If the READY light is NOT illuminated,
the vehicle is off, Do not push the
“POWER” START/STOP button because
the vehicle may restart.
b) To turn off the system, put the shift
lever in the P (Park) position and press
the POWER button beside a shift lever.
“POWER” START/STOP Button
Pressing
POWER button
Button Position Vehicle condition
OFF Off
One time ACC Electrical accessories are operational.
Two times ON
The warning lights can be checked before
the vehicle is started.
Three times OFF Off
Depressing the brake pedal while a shift lever is in the P (Park)
position
Pressing
POWER button
Button Position Vehicle condition
OFF Off
One time - Ready to drive
Without depressing the brake pedal