FEATURES AND CONTROLS
SANTA FE SPORT
11
10
HYUNDAI
HOMELINK WIRELESS CONTROL SYSTEM
Home Link
Standard Programming
To train most devices, follow these instructions:
1. For first-time programming, press and hold the two outside
buttons, HomeLink
®
Channel 1 and Channel 3 Buttons, until the
indicator light begins to flash (after 20 seconds). Release both
buttons. Do not hold the buttons for longer than 30 seconds.
2. Position the end of your hand-held transmitter 1-3 inches (2-8 cm)
away from the HomeLink
®
buttons while keeping the indicator light
in view.
3. Simultaneously press and hold both the HomeLink
®
and hand-held
transmitter button. DO NOT release the buttons until step 4 has
been completed.
4. While continuing to hold the buttons the red indicator Status LED
will flash slowly and then rapidly after HomeLink
®
successfully
trains to the frequency signal from the hand-held transmitter.
Release both buttons.
For detail instructions, refer to your Owner’s Manual or visit
www.homelink.com.
INTERIOR LIGHTS
Push the lens
to turn the
map lamp on or off.
ON
Map lamp and room lamp will turn on.
OFF
The lights stay off at all times,
even if a door is opened.
DOOR
Map lamp and room lamp
comes on when a door is opened.
Press the switch to turn the light
on or off.
Without sunroof
With sunroof
Room lamp
ANDROID
AUTO™
ANDROID
AUTO™
