DRIVING
SANTA FE
40
39
HYUNDAI
Forward Collision-Avoidance Assist is
designed to help detect and monitor
the vehicle ahead or help detect a
pedestrian or cyclist in the roadway
and warn the driver that a collision is
imminent with a warning message
and an audible warning, and if
necessary, apply emergency braking.
To operate FCA, select the Forward
Safety sub menu under User Settings
in the LCD cluster or infotainment
system. Please refer to your Owner’s
Manual for further information.
FORWARD COLLISION-AVOIDANCE ASSIST (FCA)
Lane Keeping Assist is designed to help
detect lane markings (or road edges)
while driving over a certain speed. The
system will warn the driver if the vehicle
leaves the lane without using the turn
signal, or will automatically assist the
driver’s steering to help prevent the
vehicle from departing the lane.
With the engine on, press and hold the
Lane Safety button located on the
instrument panel to turn on Lane
Keeping Assist. The white indicator light
will illuminate on the cluster. Press and
hold the button again to turn off the
system.
LANE KEEPING ASSIST (LKA)
LKAS operates only when the vehicle
speed is above 40 mph and when the
LKAS indicator is green displayed in the
instrument cluster. LKAS will not operate
properly if the lane line is not clear,
sharp bend in the road, or in heavy fog.
Refer to the Owner's Manual for more
detailed information.
NOTE:
LKA Settings can be
adjusted between warning
only and Active Assist in
the User Settings page of
the instrument cluster or
AVN Screen under Driving
Assist.
Active Assist:
FCA will warn the driver with a warning message and
an audible warning depending on the collision risk levels. Braking
assist will be applied depending on the collision risk.
Warning Only:
FCA will warn the driver with a warning message
and an audible warning depending on the collision risk levels.
Braking will not be assisted.
Off:
FCA will turn off. The warning light will illuminate on the cluster.