1
FEATURES OF YOUR HYUNDAI
31
!
WARNING:
If the child restraint seat is not anchored
properly, the risk of a child being seriously
injured or killed in a collision greatly in-
creases.
Follow the child seat manufacturer's instruc-
tions to properly install safety seats with ISOFIX
or ISOFIX-compatible attachments.
Once you have installed the ISOFIX child re-
straint seat, assure that the seat is properly
attached to the ISOFIX and tether anchors.
Also, test the safety seat before you place the
child in it. Tilt the seat from side to side. Also try
to tug the seat forward. Check to see if the
anchors hold the seat in place.
B230G01O-AAT
Installation on Outboard Rear Seats
To install a child restraint system in the outboard
rear seats, extend the shoulder/lap belt entirely
from its retractor until a "click" is felt. This will
engage the seat belt retractor automatic locking
feature, which allows the seat belt to retract but
not extend. Install the child restraint system,
buckle the seat belt and allow the seat belt to
take up any slack. Make sure that the lap portion
of the belt is tight around the child restraint
system and the shoulder portion of the belt is
positioned so that it can not interfere with the
child's head or neck. Also, double check to be
sure that the retractor has engaged the Auto-
matic Locking feature by trying to extend web-
bing out of the retractor. If the retractor is in the
Automatic Locking mode, the belt will be locked.
B230G01L
B230F01JM-AAT
Installation on Rear Seat Center Position
To install a child restraint system in the center
rear seat, extend the shoulder/lap belt entirely
from its retractor until a "click" is felt. This will
engage the seat belt retractor automatic locking
feature, which allows the seat belt to retract but
not extend. Install the child restraint system,
buckle the seat belt and allow the seat belt to
take up any slack. Make sure that the lap portion
of the belt is tight around the child restraint
system and the shoulder portion of the belt is
positioned so that it can not interfere with the
child's head or neck. Also, double check to be
sure that the retractor has engaged the Auto-
matic Locking feature by trying to extend web-
bing out of the retractor. If the retractor is in the
Automatic Locking mode, the belt will be locked.
B235G01O-A
smhma-1a.p65
5/25/2005, 2:48 PM
31
Содержание Santa Fe 2006
Страница 1: ...2006 smhma 11 p65 5 25 2005 2 44 PM 1...
Страница 11: ...INSTRUMENTSANDCONTROLS B250A04O AAT B250A01O A smhma 0 p65 3 9 2005 3 34 PM 10...
Страница 270: ...9 Measurement 9 2 Engine 9 3 Lubrication Chart 9 4 VEHICLE SPECIFICATIONS 9 smhma 9 p65 5 25 2005 2 43 PM 1...
Страница 275: ...10 INDEX 10 smhma 10 p65 5 25 2005 2 27 PM 1...