Hyundai Santa Fe 2002, Руководство пользователя

Страница: 42 / 163

FEATURES OF YOUR HYUNDAI
1- 34
B340A01A-AAT
COMBINATION TURN SIGNAL,
HEADLIGHT AND HIGH-BEAM
SWITCH
Turn Signal Operation
Pulling down on the lever causes the turn
signals on the left side of the car to blink.
Pushing upwards on the lever causes the turn
signals on the right side of the car to blink. As
the turn is completed, the lever will automati-
cally return to the center position and turn off
the turn signals at the same time. If either turn
signal indicator light blinks more rapidly than
usual, goes on but does not blink, or does not
go on at all, there is a malfunction in the
system. Check for a burned-out fuse or bulb
or see your Hyundai dealer.
B340B01A-AAT
Lane Change Signal
HSM286
B330A01Y-AAT
TACHOMETER
B330A01O
The tachometer registers the speed of your
engine in revolutions per minute (rpm). It is
useful to help you shift at the appropriate
engine speed to avoid lugging or over-revving
the engine.
CAUTION:
The engine should not be raced to such a
speed that the needle enters the red zone
on the tachometer face. This can cause
severe engine damage and may void your
warranty.
To shift from TRIP A to TRIP B, press the
reset switch. When pressed for 2 seconds, it
will reset to 0.
B340C02L-AAT
Headlight Switch
HSM284
To operate the headlights, turn the barrel on
the end of the multi-function switch. The first
position turns on the parking lights, sidelights,
tail lights and instrument panel lights. The
second position turns on the headlights.
To indicate a lane change, move the lever up
or down to a point where it begins flashing.
The lever will automatically return to the cen-
ter position when released.
Parking light auto cut
If you do not turn the parking lights "OFF"
after driving, the parking lights will automati-
cally shut "OFF" when the driver's door is
opened.
To turn them "ON" again, you must simply
turn the ignition key to the "ON" position.