Hyundai RTC 1028 RIP, Инструкция по эксплуатации

Страница: 36 / 56

EN - 36
ANTENNA INFORMATION
The AM antenna is inside the cabinet. If AM reception is unsatisfactory try repositioning
the cabinet slightly until the internal antenna is picking up the strongest signal.
The FM wire antenna is located on the back cabinet. If necessary adjust the position
and direction of this antenna until you find the position that provides the best reception.
CD OPERATION
1. Press the CD/USB button to enter CD mode, the ‘
- - -
‘ and ‚‘DISC‘
icon will be shown on the screen. The unit can play CD, CD-R
and CD-RW.
2. Press the OP/CL button to open the CD drawer.
3. Place your disc(MP3 is compatible) in the CD drawer with the label
side facing up.
4. Press the OP/CL button again to close the CD drawer.
Playback will automatically start from first track.
5. MP3 icon will be shown while MP3 is detected. No icon will be
shown when no MP3 file is detected in the disc.
PLAYING RECORDS
This system includes a full-size, 3-speed, belt-drive turntable. You can play 33, 45, and 78 RPM
records.
1. Press POWER to turn the system om.
2. Press the PHONO button to enter the PHONO mode.
3. Make sure that you have removed the stylus cover from the stylus and have released the
Tone Arm Lock that secured the tone arm to the tone arm rest.
4. Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78 RPM.
If you are playing 45 RPM singles , place the 45 RPM adapter on the centre spindle.
5. Place your record on the centre spindle.
6. Raise the CUE lever to lift the tone arm off its rest.
Move the tone arm to the edge of the record. The turntable starts automatically.
Use the CUE lever to gently lower the tone arm onto the record.
7. Adjust the VOLUME control to the desired level.
8. When the tone arm reaches the end of the record it automatically returns to the tone arm
rest and the record player stops.
9. When you finished listening. press POWER button to turn the system off.