Hyundai RC606, Инструкция по эксплуатации

Страница: 21 / 28

EN - 1
EN
REPEAT PLAYBACK
This feature allows you to continuously repeat a single track or the entire disc.
TO REPEAT A SINGLE TRACK
Press the REPEAT/ALL button once. The repeat indicator flashes. Press the
B.SKIP or F.SKIP button to select the desired track, then press the PLAY/PAU -
SE button to begin repeat playback of the selected track.
TO REPEAT THE ENTIRE DISC
Press the REPEAT/ALL button twice. The repeat indicator remain „On“. Press
the PLAY/PAUSE button to begin repeat playback of the entire disc. To cancel
repeat playback press the REPEAT/ALL button until the repeat Indicator goes
„Off“. Repeat palyback is also cancelled by pressing the STOP button or setting
the function selector to the MW or FM position.
PROGRAMMED PLAYBACK
This feature allows you to program of the CD 20 tracks and MP3 99 tracks on a disc for play -
back in any desired order.
Note: You can program tracks while a disc is stopped or playing.
Press the PROGRAM button to enter the Program Mode. The Program number
briefly shows „0 0 1“, the „0 0 1“ and the Program indicator flash.
Press the F.SKIP or B.SKIP button to select the first track number you wish to
enter in the program memory. Example: Track Number „0 0 8“.
When the desired track number appears on the display, press the PROGRAM
button again to memorize the track. The programnumber briefly shows „0 0 2“,
then „0 0 2“ flashes.
Repeat steps 2-3, select a different track number each time until you have en -
tered up to CD 20 tracks and MP3 99 tracks in the program memory. Note:
You may program the same track number to play multiple times in the program
sequence if desired.
Press the PLAY/PAUSE button to begin programmed playback. The PRO -
GRAM indicator stop flashing and remains „On“. Playback will begin with the
first track you have programmed track has been played.
After the last track has been played the player stops and the display shows
the total number of tracks on the disc. However the program sequence
remains in the memory.
The programmed sequence may be cancelled by press STOP button twice, switching to the
MW, FM or shutting the system „Off“.
PROGRAM REPEAT PLAYBACK
You can use the program and repeat features together to continuously repeat a programmed
sequence of tracks.
First, program the desired tracks according to steps 1-5 on page 8-9. When programmed play -
back begins press the REPEAT/ALL button twice to activate all tracks repeat feature. The repeat
indicator lights and all the tracks in your programmed sequence will be repeated continuosly.
To cancele programmed repeat playback, press the REPAT/ALL button again to repeat indica -
tors go „Off“.
NOTE: All of buttons on the remote control have the same function as these buttons in the CD
tary.
1.
2.
3.
4.
5.
6.
7.