EN - 14
GETTING STARTED
Connecting to power
•
Connect the power cord to a wall socket (AC 230V ~ 50Hz).
•
The radio is powered and in standby mode when you see the display is switched on.
Backup system
•
The radio is equipped with a backup system. It requires a 3 V lithium battery (type: CR2032). Insert
the battery into the battery compartment and make sure the positive and negative (+ or -) sides of
the battery are in contact with the corresponding terminals in the battery compartment.
•
If a power cut occurs, the radio automatically switches to the battery power supply and keeps the
clock and timer settings.
•
To open the battery compartment, use a screwdriver to detach the screw on the compartment door.
•
When replacing the battery, do not disconnect the power adapter. Otherwise, all clock and alarm
settings will be lost.
Setting the clock
In standby mode, press and hold the SET button to enter the clock setting mode. Press the SET
button repeatedly to cycle through the setting options: Year > Month/Day > Time
•
Setting year: Press the BACKWARD or FORWARD button.
•
Setting month/day: Press the BACKWARD button to set the month and FORWARD button to set
the day.
•
Setting the time: Press the BACKWARD button to set the hour time and FORWARD button to set
the minute time.
•
Press the SET button to confirm each setting option.
Using the antenna
Unroll and extend the antenna to improve FM signal reception.
LISTENING TO RADIO
•
Press the POWER button to switch the radio on.
•
Press the BACKWARD or FORWARD button to adjust frequency.
•
Press and hold the BACKWARD or FORWARD button to automatically tune to the next available
FM station.
•
Press the POWER button to switch the radio off.
Setting preset stations
You can store up to 10 preset stations.
•
Tune to a station.
•
Press and hold the MEM/M+ button until “P01” (or the next available preset slot) shows on the
display.
•
Press the BACKWARD or FORWARD button to select a preset number (P01-P10).
•
Press the SET button to confirm. The preset station has been set up.
•
Press the MEM/M+ button repeatedly while listening to the radio to select a preset station. Alter
-
natively, press the MEM/M+ button once and then press the BACKWARD or FORWARD button to
select a preset station.
USING THE ALARMS
Setting alarms
The radio lets you have 2 alarm settings. To set the alarms: In standby mode, press and hold the
ALARM 1 or ALARM 2 button to enter the alarm time setting mode. In the alarm setting mode, press
the ALARM 1 or ALARM 2 button repeatedly to cycle through the setting options: Alarm time > Alarm
sound source > Alarm frequency
