Network Camera User Manual
121
on the line, two red squares are displayed on each end, and you can click-and-drag one
of the red squares to define the shape and length of the line.
6.
Select the direction for line crossing detection. And you can select the directions as
A<->B, A ->B, and B->A.
A<->B
: Only the arrow on the B side shows; when an object going across the plane with
both direction can be detected and alarms are triggered.
A->B
: Only the object crossing the configured line from the A side to the B side can
be detected.
B->A
: Only the object crossing the configured line from the B side to the A side can
be detected.
7.
Click-and-drag the slider to set the detection sensitivity.
Sensitivity:
Range [1-100]. The higher the value is, the more easily the line crossing
action can be detected.
8.
Repeat the above steps to configure other lines. Up to 4 lines can be set. You can click
the
Clear
button to clear all pre-defined lines.
9.
Click the
Arming Schedule
to set the arming schedule.
10.
Select the linkage methods for line crossing detection, including Notify Surveillance
Center, Send Email, Upload to FTP/Memory Card/NAS, Trigger Channel and Trigger
Alarm Output.
11.
Click
Save
to save the settings.
10.2.7
Configuring Region Entrance Detection
Purpose:
Region entrance detection function detects people, vehicle or other objects which enter a
pre-defined virtual region from the outside place, and some certain actions can be taken when
the alarm is triggered.
Steps:
1.
Enter the Region Entrance Detection settings interface,
Configuration > Event >
Smart Event > Region Entrance Detection
.
