Hyundai MSD762ATV, Инструкция по эксплуатации

Страница: 82 / 100

EN - 82
1.5 SCREEN SAVER
ON: If the image remains motionless on the screen, for example the disc is paused, stopped
etc, for several minutes, a screen saver will appear on the screen. You can press any key or
button except [STANDBY] to wake it up.
The unit will go into the standby mode after about 20 minutes being in the screen saver mode.
You can press [STANDBY] to switch it on.
OFF: Disable the screen saver function.
2 AUDIO SETUP PAGE
2.1 ANALOG AUDIO SETUP
2.1.1 DOWNMIX
LT/RT: The 5.1-channel audio is mixed into left channel and right channel and is output via the
FL and FR speakers respectively.
STEREO:
The 5.1-channel audio is mixed into stereo signal and is output via the FL and FR
speakers.
NOTE: This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
2.2. DIGITAL AUDIO SETUP
2.2.1 DIGITAL OUTPUT
SPDIF OFF : There will be no digital audio signal output. (Coaxial off)
ALL: The digital audio signal output will be in its raw format. Normally, this m ode is used for
DTS & Dolby Digital
5.1 signals.
PCM ONLY: The digital audio signal output will be in PCM format. Normally, this mode is used
for audio CD signals.
2.2.2 LPCM OUT
When DIGITAL OUTPUT is set to PCM ONLY , this item is available.
Select a sample rating for the analog audio output. There are two options, 48KHz and 96KHz.
NOTE: Some amplifiers don‘t support 96KHz sampling which will affect the coaxial output.
2.3 DOLBY DIGITAL SETUP
2.3.1 DUAL MONO
STEREO: The player outputs the left-channel audio and right-channel audio via the FL and FR
speaker respectively.
L-MONO: The player outputs the left-channel audio only via both the FL and FR speaker.
R- MONO: The player outputs the right-channel audio only via both the FL and FR speaker.
MIX- MONO:
The player outputs the average signal of the left-channel and right-channel audio
via the FL speaker and the FR speaker.
NOTE: This function only applies to the Dolby AC -3 encoded 2-channel discs.