Hyundai MSD 112 DRU, Инструкция по эксплуатации

Страница: 70 / 104

ENG - 70
• Press to access or quit the CD ripping menu. For details of CD ripping, please refer to CD
RIPPING in this chapter.
• Press repeatedly to select the available audio languages provided by the disc (for DVD).
• Press repeatedly to advance the video frame by frame. Press [

] to resume the normal
playback. ( Note: Applies to DVD, VCD, MPEG4 discs etc)
• Press repeatedly for slow-motion playback in different speeds. The available speeds are 1/2,
1/4, 1/8, 1/16 of the normal speed and the normal speed. Press [

] to resume the normal
playback. ( Note: Applies to DVD, VCD, MPEG4,etc)
• You can repeat a specific section of a disc with this button.
Press this button to mark down the starting point (A) and press it again to mark down
the ending point (B). Then, the unit will playback this section over and over again.
Press it for the third time to cancel A-B repeat and resume to the normal playback.
Note:
Points A and B must be in the same title/ track.
• Press repeatedly to switch the repeat modes.
(
Note:
For VCD2.0, this function is invalid when PBC function is activated.)
• Press to zoom in/out the scene. The available zoom ratios are 2X, 3X, 4X, 1/2, 1/3 and 1/4.
In zoomed-in mode, the direction keys can be used to move the zooming center.
( Note: Applies to DVD, VCD, etc.)
• Press to switch the viewing angles.
( Note: This function only works with those discs encoded with multiple camera angles.)
• Press this button to enter/exit the program menu with which you can playback the contents
of a disc in your desired order.
In the program menu, use the direction keys and digit keys to program a playback list,
then move the highlight to ‘ START ‘ and press [ENTER] to start program playback.
During program playback, press [PRoG] to enter the program menu. Now, ‘SToP‘
is highlighted. Press [ENTER] to cancel the current program playback.