Hyundai MS 618 A3, Инструкция по эксплуатации

Страница: 39 / 60

ENG
ENG - 39
PROGRAM PLAyBACK
You can program up to 32 titles in arbitrary sequence.
You can also program a title more than once.
1) In stop mode, press PLAY MO. button on the main unit or PROGRAM button on remote
control. On the display you can see “P01” and “PROG” blinking.
2) Use

/

SKIP REV or

/

SKIP FWD. To select a desired title and press
PLAY MO/ PROG to confirm.
3) Repeat steps 2 to store further titles.
4) Press PLAY/PAUSE to start playback of the programmed titles.
REVIEWING yOUR SET PROGRAM
After playing at least one programmed rack, press

or

, the display will show your stored
track numbers.
ERASING A PROGRAM
You can erase he contents of the memory by:
• opening the CD door;
• slide the function selector to Radio or TAPE mode.
• Press stop button twice
NOTICE fOR CD-R/CD-RW USERS:
Depending on the type of CD writer, disc brand and writing speed, some reading problems may
occur.
CD AND PLAyER HANDLING
• The Lens of the CD player should never be touched!
• Sudden changes in the surrounding temperature can cause condensation to form
and the lens of your CD player to cloud over. Playing a CD in this condition is impossible.
Do not attempt to clean the lens. Leave the set in a warm environment until the moisture
evaporates.
• Always close the CD door to keep the CD compartment dust-free.
To clean, the compartment with a soft dry cloth.
• To clean the CD, wipe in a straight line from the centre towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as they may damage the disc.
• Never write on a CD or attach any stickers to it.