1
FEATURES OF YOUR HYUNDAI
142
5. EQUALIZER (EQ) Button
Press the EQ button to select the
CLASSIC, POPS, ROCK, JAZZ and
DEFEAT MODE for the desired tone
quality. Each press of the button
changes the display as follows;
8. PRESET STATION Select
Buttons
Six (6) stations for AM, FM1 and FM2
respectively can be preset in the elec-
tronic memory circuit.
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be
programmed into the memory of the
radio. Then, by simply pressing the
band select button and/or one of the
six station select buttons, you may
recall any of these stations instantly.
To program the stations, follow these
steps:
o Press band selector to set the band
for AM, FM and FM2.
o Select the desired station to be
stored by seek or manual tuning.
o Determine the preset station select
button you wish to use to access
that station.
o Press the station select button for
more than two seconds. Beep sound
will be heard while depressing the
button. You should then release the
button, and proceed to program the
next desired station. A total of 18
stations can be programmed by se-
lecting one AM and two FM station
per button.
o When completed, any preset sta-
tion may be recalled by selecting
AM, FM1 or FM2 band and the
appropriate station button.
6. SEEK Select Button
(Automatic Channel Selection)
Press the SEEK select button. When
the ( ) side is pressed, the unit will
automatically tune to the next higher
frequency and when the ( ) side is
pressed, it will automatically tune to
the next lower frequency.
7. TUNE (Manual) Select Knob
Rotate the knob clockwise to increase
the frequency and turn the knob coun-
terclockwise to reduce the frequency.
CLASSIC
→
POPS
→
ROCK
→
JAZZ
→
DEFEAT
CAUTION:
o Do not place beverages close to
the audio system. The playback
mechanism may be damaged if
you spill them.
o Do not impact on the audio sys-
tem, or the playback mechanism
could be damaged.
!
