Genuine Accessories
A. Confirm the vehicle parking brake is set.
B. Cover the forward-facing photocell with a dark cloth or towel as shown.
C. Turn the ignition to "ON".
D. With the dark cloth in place, and the power on, the mirror will darken.
E. Remove the dark cloth, and the mirror will return to normal.
Do NOT allow the vehicle to move. Ensure the brake pedal is always
depressed while the engine is running and while the reverse gear is
engaged.
Function Check (Reverse Override)
Function Check Preparation
N
O
T
E
A. Take up any excess harness slack and secure to vehicle harnesses
with two (2) wire ties as shown.
B. Trim excess wire tie material.
N
O
T
E
A. Reconnect the negative (-) battery cable, and torque to:
5.0 ~ 6.0 N.m (0.50 ~ 0.60 kgf.m, 45 ~ 52 lb-in).
B. Reinstall the negative (-) battery terminal cover, if applicable.
C. Close hood.
39
Function Check
N
O
T
E
A. Cover the forward-facing photocell with a dark cloth or towel.
B. Turn the ignition to "ON" and start engine.
C. With the dark cloth in place, and the power on, the mirror will darken.
D. Put the vehicle into reverse, and the mirror will return to a normal state.
E. Put the vehicle in park and stop engine.
N
O
T
E
Side Cutters
38
37
WARNING: Shock Hazard! Do not touch vehicle's negative battery
terminal to vehicle's positive battery terminal. Serious injury and
damage to the vehicle may occur.
Ratchet, 10mm Deep Well Socket, Extension, and Torque
Wrench
40
Wire
Ties
Revision Date
03/03/2020
Page 13 of 16
