EN
EN - 19
ALARM TIME SETTING
1)
Press the Alarm Set Button (6) and simultaneously press the Hour Set Button (10) or Minute
Set Button (9) as appropriate until the required alarm time is reached.
2)
To double check the alarm time, simply press the Alarm Set Button (6) then the display will
show the pre-set alarm time.
RADIO OPERATION
For AM reception this unit uses an internal directional aerial, rotate the unit for best reception.
For FM reception, the wire FM Antenna (12) on the back of the unit should be fully unwound.
1)
Set the Function Selector (11) to the “ON” position.
2)
Set the Waveband Selector (4) to the required waveband.
3)
Use the Tuning Control (3) to select the desired station.
4)
Adjust the Volume Control (2) to the desired listening level.
5)
To turn off the radio, set the Function Selector (11) to “OFF”.
WAKE TO RADIO
Having selected your desired station and adjusted the desired listening level, proceed as follows:
1)
Follow the instructions for “ALARM TIME SETTING” above.
2)
When the desired alarm time has been selected, set the Function Selector (11) to the “AUTO”
position.
3)
The radio will switch on automatically at the pre-set alarm time.
4)
The alarm can be temporarily stopped for approximate 9 minutes by pressing the Snooze
Button (5) once.
5)
Press the Alarm Set Button (6) to turn off the radio. The alarm will activate again after 24 hours
unless the Function Selector (11) is set to “OFF”.
WAKE TO BUZZER
1)
Follow the instructions for “ALARM TIME SETTING” above.
2)
When the desired alarm time has been selected, set the Function Selector (11) to the “AUTO”
position.
3)
Turn the Volume Control – Buzz On/Off (2) fully anti-clockwise to select the BUZZ function.
4)
The alarm tone will switch on automatically at the pre-set alarm time.
5)
The alarm can be temporarily stopped for approximate 9 minutes by pressing the Snooze
Button (5) once.
6)
Press the Alarm Set Button (6) to turn off the buzzer. The alarm will activate again after
24 hours unless the Function Selector (11) is set to “OFF”.
SET THE COUNTDOWN TIMER
The countdown alarm can be adjusted from 1 minute to 1 hour and 59 minutes.
1)
Set the Function Selector (11) to either “ON” or “OFF” position.
2)
Slide the Countdown On/Off Button (8) to “ON” position.
3)
Adjust the desired time by pressing the Hour Set Button (10) or Minute Set Button (9) as
appropriate until the required timer period is reached.
4)
The timer starts to count down and the alarm sounds when the required timer period
is reached.
5)
To turn off the countdown timer, slide the Countdown On/Off Button (8) to “OFF” position.
Содержание KR 615
Страница 31: ...Pozn mky Notatka Notes Megjegyz s...
Страница 32: ......
