ENG - 26
FUNCTION
Number
of presses
„MENU“
1 x
2 x
3 x
4 x
Function
HEAT
set power
1800 W
TEMP
Set temperature
default 240 °C
HEAT + TIMER
Power and time
setting by dial
turns
TEMP + TIMER
TEMP and time
setting by dial
turns
Control lights
P
°C
P +
°C +
AUTOMATIC TURN OFF wHEN LIFTING AwAy THE DISH
When the cooking dish is lifted away from the cooking surface, the unit will TURN itself OFF.
If the dish is returned back on the surface within 40 sec, the cooking process will resume with
the pre-lifting settings. If the dish is NOT returned back within 40 sec, the unit will TURN OFF
completelly.
wARNING
: Once the cooking or warming process is finished, disconnect the mains plug from
the out-let!
MAINTENANCE AND CLEAN
Clean the appliance after each use. Disconnect the plug and wait until the unit cooled off.
Do not use fuel, paint thinner, a brush or polishing powder to clean the induction cooker.
Wipe the unit using a dish washing agent and a damp cloth. Use a vacuum cleaner to remove
dirt from the air supply and exhaust vent.
Wipe off the ceramic field with a damp cloth or use a mild, non-abrasive soap solution.
Wipe off the casing and the operating panel with a soft cloth or a mild detergent.
Prevent water from running over the unit (if water gets inside the unit, the cooker may
malfunction).
Error Code List:
If LED-display shows the error code, please reference to the solution as following.
Error code
Cause
Suggested solution
E00
No pot/pan; Unsuitable
cookware
Use suitable cookware
E1
Electrical malfunction/ Short
circuit
Contact the manufacturer or a competent
after-sales service
E2
Temperature sensor
damaged
Contact the manufacturer or a competent
after-sales service
E3
Voltage too high
Have your power supply checked; Unplug the
appliance, wait about 2 min. and plug in the
appliance again
E4
Voltage too low
Have your power supply checked; Unplug the
appliance, wait about 2 min. and plug in the
appliance again
