Hyundai HYW2400P, Руководство пользователя

Страница: 17 / 32

6. Uncoil high pressure hose and attach one threaded end of the hose to
base of spray gun.
WARNING
The high pressure stream of water that this
equipment produces can cut through skin and its
underlying tissues, leading to serious injury and
possible amputation.
•NEVER connect high pressure hose to nozzle extension.
•Keep high pressure hose connected to pump and spray gun while
system is pressurized.
•Always be certain spray gun, nozzles and accessories are correctly
attached.
7. Similarly, screw the other end of the high pressure hose to high pressure
outlet on pump.
8. Turn Water Supply on, point gun in a safe direction and squeeze the
trigger to purge the pump of air and debris. Do this for at least 30
seconds.
9. Take a look at all connections to make sure there are no leaks or loose
connections.
10. Connect the garden hose to the water inlet. Tighten by hand.
11. To start the machine, locate the engine switch on the side of the
engine, and switch it to the ON position. (see component chart to
locate switch) Check to ensure fuel valve is in the ON position and if
starting cold apply the choke.
12. Always release water pressure by squeezing trigger gun.
13. Pull recoil cord slowly until resistance is felt and then pull rapidly to
avoid kickback. Make sure to position yourself in a balanced position.
DO NOT place hand on engine exhaust for balance, this will result in
severe burns.
Page 17