14
Figure 3-3
Scan the Doorbell QR Code
3.
Scan the QR code or input the serial No. on the front panel of the doorbell body.
Activation page pops up after finishing the Wi-Fi connection.
The suggested scanning distance is 5 to 10 cm. The doorbell gives a beep for success.
4.
Activate the doorbell.
1)
Tap
Set Device Password and input a password to activate the doorbell.
2)
Tap
Activate in the next page to finish activating.
5.
Optional: Input the verification code of the doorbell in the pop-up page after
activation.
This step is only necessary for adding the doorbell by inputting the serial No..