HYUNDAI
09
7. USB POWER
Connect the USB device to the HYPS-400 with either the original cable or the included multi-tip cable
(better use original cable of Apple® for Apple® products). Press Power button to start USB power. When
disconnected, the HYPS-400 will automatically shut off. The number of times you can recharge a USB
device will vary between devices.
8. SUPPLY TO 19V LAPTOPS
Select the appropriate input tip and connect the HYPS-400 with your laptop. Press Power button to start
19V/3.5A power. When disconnected, the HYPS-400 will automatically shut off. The number of times you
can recharge a laptop will vary between devices.
9. SUPPLY TO 12V DEVICES
The HYPS-400 can run/charge 12VDC appliances that draw 10 amps or less. Two Options as follows:
1) Connect the HYPS-400 to 12V devices with optional accessory (This item does not include the
accessory). Press Power button to start 12V power. When disconnected, the HYPS-400 will automatically
shut off.
2) Connect the HYPS-400 to 12V devices by the included accessory. Do not need press Power button as
the EC5 12VDC output is ALWAYS activated. When battery voltage of 11 HYPS-400 is too low, 12V
devices will stop running/charging.
10. FLASHLIGHT
Press Flashlight button to start flashlight. Press once to switch lighting modes:
Steady On – Strobe – SOS – Off.
