background image

  13

Preparation

Fuel Type : Fresh Straight Unleaded Petrol
Fuel Capacity : 1L

Adding Fuel

NOTE - 

The machine is delivered without petrol. All machines are tested and inspected so there 

may be some residual petrol left in the machine so please fill with caution.

Remove the fuel tank cap.

1

Fill the fuel tank with fresh straight unleaded petrol. Allow a 25mm gap from the top of the tank, 
then refit the cap securely. DO NOT mix petrol with oil and clean up any spills immediately.

NOTE - 

DO NOT overfill. The fuel tank only needs to contain enough fuel to complete the days 

work. If you run out of fuel, refilling must only be done once the engine has cooled down. Fuel 
stored within the machine for 28 days or more can go stale and should be drained before further 
use.

NOTE -

 Make sure not to drip petrol onto the plastic parts to prevent damaging them and remove 

all traces of spilt petrol immediately. The warranty will not cover damage to plastic parts caused 
by petrol.

2

Refit the fuel filler cap securely and clean up any fuel spilt before starting the engine.

3

Make sure you read the fuel safety before handling fuel.

Содержание HYFT60SP





































Отзывы: