Hyundai HYCH15100TE, Инструкция по эксплуатации, Страница: 32 / 40

30
OPERATION TIME PROCEDURE COMMENTS
BREAK IN
Change engine oil and
filter after first five
hours.
Check belt tension.
Check all nuts and
bolts for tightness.
Check engine oil.
Check chipper knife
for sharpness.
Check knife and wear
plate gap.
Clean air filter.
Grease bearings in
basic chipper. *
Per recommendations.
Do not overfill.
See knife information.
See gap setting
information.
Per engine
recommendations.
Use high quality
multipurpose lithium
grease.
Follow oil
recommendations per
the engine & owner’s
manual.
Adjust per directions.
Tighten if necessary.
•
•
•
•
•
•
8 HOURS
•
•
•
•
•
•
•
•
•
•
40 HOURS
Change engine oil. **
Check tire pressure.
Remove and sharpen
or replace chipper
knife.
Sharpen wear plate.
Replace belt.
Change engine oil.
Change engine oil
Clean and adjust, or
replace spark plugs.
Per recommendations
in engine manual.
Order replacement
belts.
Per recommendations.
Do not overfill.
Per recommendations.
Do not overfill.
Add or adjust as
required.
See knife information.
See wear plate
information.
•
•
•
•
•
•
•
•
100 HOURS
•
•
•
•
200 HOURS
•
•
•
* No more than 3 shots from a hand grease gun. Do not over-grease as this may
damage the bearing.
** Lubrication schedule may vary depending on working environment. Overly dirty
and dusty situations will require more frequent oil changes to protect the engine.
LUBRICATION AND MAINTENANCE