1
5
8.0
Inspect and clean the machine as laid out in the maintenance section.
8.1
Store in a cool dry place away from extreme changes of temperature.
8.2
Ensure the cable is neatly coiled and stored so as not to be a trip hazard or be at risk
of getting damaged.
8.3
Do not stack other items on top of the machine.
Problem
Possible Cause
Solution
Device does not start
Collection bag not fitted
Install collection bag
Mains voltage is not
present
Check plug socket, cable,
line, plug and fuse.
Where appropriate repair
through electrical specialist
Defective on/off switch
Repair via customer
services
Worn carbon brushes
Defective motor
Impeller fan covers still
open
Close impeller fan cover
Device works with
intermittent fault
Damaged power cable
Check cable
Internal loose connection
Repair via customer
services
Defective on/off switch
Low suction capacity
Collection bag is full
Empty collection bag
Collection bag is dirty
Clean collection bag
Selector switch is in wrong
position
Set selector switch to the
suction symbol
Device clogged or blocked
by foreign bodies
Remove blockages (see
maintenance section)
Low blowing power
Selector switch in incorrect
position
Set selector switch to the
blowing symbol
Speed controller in the
wrong position
Rotate speed controller to
high position
Device works with
intermittent power
Foreign bodies blocking
the impeller wheel
Remove blockage (see
maintenance section)
8. STORAGE
9. TROUBLESHOOTING
